IEC 61076-2-111:2017 电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范

标准编号：IEC 61076-2-111:2017

中文名称：电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺钉锁紧的电源连接器详细规范

英文名称：Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking

发布日期：2017-12-07

标准范围

IEC 61076-2-111:2017规定了带M12螺丝锁定的4至6路圆形连接器，额定电流高达16 A，额定电压为63 V或630 V，通常用于工业场所的电源和电源应用。这些连接器由可重新接线或不可重新接线的固定和自由连接器组成，带有M12螺钉锁定。公接头有圆形触点？1.0毫米和？1.5毫米。本文档提供的不同编码防止了相应编码的公连接器或母连接器与其他标准所涵盖的任何其他类似尺寸的接口的配合以及本文档提供的不同编码之间的交叉配合。M12是这些圆形连接器的螺钉锁定机构的螺纹尺寸。关键词:连接器，圆形连接器，M12。？

IEC 61076-2-111:2017 specifies 4 to 6-way circular connectors with M12 screw-locking with current ratings up to 16 A and voltage ratings of 63 V or 630 V, that are typically used for power supply and power applications in industrial premises. These connectors consist of both, fixed and free connectors either rewireable or non-rewireable, with M12 screw-locking. Male connectors have round contacts？1,0 mm and？1,5 mm.
The different codings provided by this document prevent the mating of accordingly coded male or female connectors to any other similarly sized interfaces, covered by other standards and the cross-mating between the different codings provided by this document.
M12 is the dimension of the thread of the screw locking mechanism of these circular connectors.
Keywords: Connectors, Circular Connectors, M12.？

标准预览图