IEC 60317-62:2020 特种绕组线规范第62部分:温度指数为200的聚酯玻璃纤维缠绕硅树脂或清漆浸渍裸或漆包扁铜线

标准编号：IEC 60317-62:2020

中文名称：特种绕组线规范第62部分:温度指数为200的聚酯玻璃纤维缠绕硅树脂或清漆浸渍裸或漆包扁铜线

英文名称：Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200

发布日期：2020-06-10

标准范围

IEC 60317-62:2020作为IEC 60317-62:2020 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60317-62:2020规定了聚酯玻璃纤维缠绕、硅树脂或清漆浸渍裸、1级或2级漆包矩形铜绕组线的要求，温度指数200。浸渍剂是含硅氧烷的树脂或清漆。本文件涵盖的标称导体尺寸范围为:-宽度:最小。2.0 mm最大16.0 mm；-厚度:最小。最大0.80毫米。5.60毫米。注意:对于这种类型的导线，热冲击试验是不合适的，因此无法确定热冲击温度。因此，不能指定基于温度指数和热冲击温度要求的等级。第二版取消并取代了2012年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-修订标准的标题，以更精确地描述电线的结构；-修订第1条，标准的范围，以提供更多电线结构的细节；-修订3.2.2，玻璃纤维覆盖层的一般绕组要求。

IEC 60317-62:2020 is available as IEC 60317-62:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60317-62:2020 specifies the requirements of polyester glass-fibre wound, silicone resin or varnish impregnated bare, grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 200. The impregnating agent is a silicone containing resin or varnish.The range of nominal conductor dimensions covered by this document is:
- width: min. 2,0 mm max. 16,0 mm;
- thickness: min. 0,80 mm max. 5,60 mm.
NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified.
This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- revision to the title of the standard to more precisely describe the construction of the wire;
- revision to Clause 1, the scope of the standard, to provide more detail of the wire construction;
- revision to 3.2.2, general winding wire requirements of the glass fibre covering.

标准预览图