IEC 61800-2:2015 可调速电力驱动系统第2部分:一般要求 - 低电压可调速度等级规格 电力传动系统

标准编号：IEC 61800-2:2015

中文名称：可调速电力驱动系统第2部分:一般要求 - 低电压可调速度等级规格 电力传动系统

英文名称：Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems

发布日期：2015-07-22

标准范围

IEC 61800-2:20 15适用于可调速度交流电。功率驱动系统，包括半导体功率转换及其控制、保护、监控、测量和交流装置。马达。它适用于用于提供交流电的可调速度电力驱动系统。来自BDM的电机连接到1 kV交流电的线对线电压。50 Hz或60 Hz和/或高达并包括1.5 kV D.C.的电压。输入端。注1可调速电动交流电。用于提供交流电的电力驱动系统。电机，额定转换器输入电压高于1 000 V交流电。受IEC 61800-4保护。注2可调速电动直流。用于直流供电的电力驱动系统。IEC 61800-1涵盖了电机。注3适用于可调速度交流电。动力驱动系统具有串联-连接的电子功率转换器部分，线对线电压是串联连接的输入电压之和。牵引应用和电动汽车不在本标准范围内。IEC 61800-2:20 15旨在定义交流电的以下方面。动力驱动系统（PDS）:-PDS的主要部分；-评级和业绩；-PDS预期安装和操作环境的规范；-指定完整PDS时可能适用的其他规范。本标准提供了最低要求，可用于客户和制造商之间制定规范。与上一版相比，该版本包括以下重大技术变化。a)第1条（范围）已更新，b)第2条（规范性引用文件）已更新，c)第3条（定义）已更新，包括将在IEC 61800系列标准中使用的基本定义，d)第4条已更新如下:1)BDM/CDM/PDS的基本拓扑描述(4.2)；2）评级和性能（4.3和4.4）；3)参考IEC 61800系列中关于EMC(IEC 61800-3)、电气安全(IEC 61800-5-1)、功能安全(IEC 61800-5-2)、负载占空比方面(IEC TR 61800-6)、通信配置文件(IEC 61800-7系列)和电源接口电压(IEC TS 61800-8)的适用标准，以避免冲突的要求(4.5、4.6、4.7、4.10、4.11、4.12)；4）更新生态设计要求（4.8）；5）更新环境评价要求（4.9）；6）爆炸性环境要求的实施（4.13）。e)第5条已更新为试验要求，以便在设计要求和试验要求之间提供明确的联系。f)第6条已更新，以协调IEC 61800系列中的标记和文件要求。g)删除现有附件A至G，代之以新的附件A至C。

IEC 61800-2:2015 applies to adjustable speed electric a.c. power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the a.c. motors. It applies to adjustable speed electric power drive systems intended to feed a.c. motors from a BDM connected to line-to-line voltages up to and including 1 kV a.c. 50 Hz or 60 Hz and/or voltages up to and including 1,5 kV d.c. input side.
NOTE 1 Adjustable speed electric a.c. power drive systems intended to feed a.c. motors, and with rated converter input voltages above 1 000 V a.c. are covered by IEC 61800-4.
NOTE 2 Adjustable speed electric d.c. power drive systems intended to feed d.c. motors are covered by IEC 61800-1.
NOTE 3 For adjustable speed electric a.c. power drive systems having series-connected electronic power converter sections, the line-to-line voltage is the sum of the series connected input voltages.
Traction applications and electric vehicles are excluded from the scope of this standard. IEC 61800-2:2015 is intended to define the following aspects of an a.c. power drive system (PDS):
- principal parts of the PDS;
- ratings and performance;
- specifications for the environment in which the PDS is intended to be installed and operated;
- other specifications which might be applicable when specifying a complete PDS.
This standard provides minimum requirements, which may be used for the development of a specification between customer and manufacturer. This edition includes the following significant technical changes with respect to the previous edition.
a) Clause 1 (Scope) has been updated,
b) Clause 2 (Normative references) has been updated,
c) Clause 3 (Definitions) has been updated including fundamental definitions to be used across the IEC 61800 series of standards,
d) Clause 4 has been updated with respect to:
1) description of the basic topology for BDM/CDM/PDS (4.2);
2) ratings and performance (4.3 and 4.4);
3) reference to applicable standards within the IEC 61800 series with respect to EMC (IEC 61800-3), Electrical safety (IEC 61800-5-1), Functional safety (IEC 61800-5-2), Load duty aspects (IEC TR 61800-6), Communication profiles (IEC 61800-7 series) and Power interface voltage (IEC TS 61800-8) to avoid conflicting requirements (4.5, 4.6, 4.7, 4.10, 4.11, 4.12);
4) update of requirement for ECO design (4.8);
5) update of requirement for environmental evaluation (4.9);
6) implementation of requirement for explosive atmosphere (4.13).
e) Clause 5 has been updated with test requirement in order to provide a clear link between design requirement and test requirement.
f) Clause 6 has been updated to harmonize the marking and documentation requirement within the IEC 61800 series.
g) Existing Annexes A to G have been deleted and replaced with new Annexes A to C.

标准预览图