IEC 61010-2-120:2016 测量、控制和实验室用电气设备的安全要求.第2-120部分:设备机械方面的特殊安全要求

标准编号：IEC 61010-2-120:2016

中文名称：测量、控制和实验室用电气设备的安全要求.第2-120部分:设备机械方面的特殊安全要求

英文名称：Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment

发布日期：2016-10-20

标准范围

IEC 61010-2-120:2016规定了以下类型的电气设备及其附件的特定安全要求，无论它们打算在哪里使用，这些电气设备及其附件属于以下a）、b）或c），并且根据设备用于特定应用的1）至5）中的一个或多个项目存在来自动力驱动移动部件的危险。1)装配有或打算装配有驱动系统而不是直接施加的人或动物的努力的组件，由连接的部件或部件组成，其中至少一个部件或部件移动，并且为了特定的应用而连接在一起。2）第1）项中提到的组件，仅缺少在现场连接组件或连接到能量和运动源的组件。3)第1)和2)项中提及的组件，仅当安装在运输工具上或安装在建筑物或结构中时，才准备好安装并能够正常工作。4)第1)、2)和3)项中提及的组件或部分完成的组件，其为了达到相同的目的而被布置和控制，使得它们作为一个整体起作用。部分完成的组件是指本身不能执行特定应用的设备。部分完成的组件仅用于与其他设备结合或组装，从而形成本标准适用的设备。5)连接部件或部件的组件，其中至少一个部件或部件移动并连接在一起，用于提升负载，其唯一动力源是直接施加的人力。根据IEC 61010-1:20 10，它具有水平标准的地位。

IEC 61010-2-120:2016 specifies particular safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used, which fall under a), b), or c) below and present HAZARDS from the power driven moving parts according to one or more of the items 1) to 5) used by the equipment for a specific application.
1) An assembly, fitted with or intended to be fitted with a drive system other than directly applied human or animal effort, consisting of linked parts or components, at least one of which moves, and which are joined together for a specific application.
2) An assembly referred to in item 1), missing only the components to connect it on site or to sources of energy and motion.
3) An assembly referred to in items 1) and 2), ready to be installed and able to function as it stands only if mounted on a means of transport, or installed in a building or a structure.
4) Assemblies referred to in items 1), 2) and 3) or partly completed assemblies which, in order to achieve the same end, are arranged and controlled so that they function as an integral whole. A partly completed assembly is equipment which cannot perform a specific application by itself. A partly completed assembly is only intended to be incorporated into, or assembled with, other equipment, thereby forming equipment to which this standard applies.
5) An assembly of linked parts or components, at least one of which moves and which are joined together, intended for lifting loads and whose only power source is directly applied human effort.It has the status of a horizontal standard in accordance with IEC 61010-1:2010.

标准预览图