IEC 61169-63:2020 射频连接器.第63部分:分规范.外导体内径为6.5mm（0256in）的卡口锁射频同轴连接器.特性阻抗75欧姆（BNC75型）

标准编号：IEC 61169-63:2020

中文名称：射频连接器.第63部分:分规范.外导体内径为6.5mm（0256in）的卡口锁射频同轴连接器.特性阻抗75欧姆（BNC75型）

英文名称：Radio frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)

发布日期：2020-05-26

标准范围

IEC 61169-63:2020是一个分段规范(SS)，它提供了用于准备RF同轴连接器的详细规范(DS)的信息和规则，所述RF同轴连接器可以优选地与IEC 60096-2的RF电缆60096 IEC 50-3一起使用。这些连接器模式用于使用卡口型耦合机构的低功率、快速连接/断开应用，通常称为特性阻抗为75 W的“BNC”型。它描述了通用连接器的接口尺寸、标准测试连接器的尺寸细节以及测量信息和选自IEC 61169-1的强制性测试，适用于与特性阻抗为75 W的BNC型连接器相关的所有DS。本文件指出了编写DS时需要考虑的推荐性能特征，并涵盖了测试时间表和检查要求。

IEC 61169-63:2020 which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors which can preferably be used with RF cables 60096 IEC 50-3 of IEC 60096-2. These connector patterns are for low power, quick connect/disconnect applications using a bayonet type coupling mechanism and are commonly known as type "BNC" with characteristic impedance 75 W.
It describes the interface dimensions for general purpose connectors, dimensional details for standard test connectors together with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type BNC connectors with characteristic impedance 75 W.
This document indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.

标准预览图