IEC 61076-3-119:2017 电气和电子设备用连接器.产品要求.第3-119部分:矩形连接器.频率高达100MHz的数据传输用工业环境用带推拉耦合的屏蔽和非屏蔽、自由和固定10路连接器详细规范

标准编号：IEC 61076-3-119:2017

中文名称：电气和电子设备用连接器.产品要求.第3-119部分:矩形连接器.频率高达100MHz的数据传输用工业环境用带推拉耦合的屏蔽和非屏蔽、自由和固定10路连接器详细规范

英文名称：Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and？unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for dat

发布日期：2017-12-08

标准范围

IEC 61076-3-119:2017（E）建立了10路屏蔽和非屏蔽矩形、自由和固定连接器的规范和测试要求，具有推挽耦合，用于频率高达100 MHz的数据传输和工业环境中的使用。本文件规定了带圆形触点的自由和固定连接器，适用于螺钉或压接终端。其他终端技术，如焊接或印刷板连接，由制造商和用户商定。根据IEC 60529，自由和固定连接器具有用于IP65和IP67防护的推拉锁定机制。根据IEC 61984:2008 3.9，根据本文件的连接器不具有断裂强度COC，因此，除非制造商另有规定，否则在带电或负载下正常使用时，它们不打算接合或脱离。关键词:连接器，矩形连接器，10路连接器，推挽式联轴器？

IEC 61076-3-119:2017(E) establishes specifications and test requirements for 10-way shielded and unshielded rectangular, free and fixed connectors, with push-pull coupling, for data transmission with frequencies up to 100 MHz and for use in industrial environments.
This document specifies free and fixed connectors with round contacts, suitable for screw or crimp terminations. Other terminations techniques, such as solder or printed board connections are upon agreement between manufacturer and user. The free and fixed connectors have a push-pull locking mechanism for IP65 and IP67 protection according to IEC 60529.
Connectors according this document are without breaking capacity COC according to 3.9 of IEC 61984:2008, therefore they are not intended to be engaged or disengaged in normal use when live or under load, if not otherwise specified by the manufacturer.
Key words: Connectors, Rectangular Connectors, 10 Way Connectors, Push-Pull Coupling？

标准预览图