IEC 60079-29-1:2016 爆炸性环境.第29-1部分:气体探测器.可燃气体探测器的性能要求

标准编号：IEC 60079-29-1:2016

中文名称：爆炸性环境.第29-1部分:气体探测器.可燃气体探测器的性能要求

英文名称：Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

发布日期：2016-07-21

标准范围

IEC 60079-29-1:2016规定了结构、测试和性能的一般要求，并描述了适用于便携式、可运输和固定设备的测试方法，用于检测和测量空气中的可燃气体或蒸汽浓度。该设备或其部件适用于爆炸性环境和易受沼气影响的矿井。第二版IEC 60079-29-1取消并取代了第一版IEC 60079-29-1:2007系列，构成技术修订版。有关本版本与上一版本之间的大量更改，请参阅文件的前言。关键词:空气中可燃气体或蒸汽浓度的检测和测量、爆炸性环境、易受沼气影响的矿山、爆炸危险

IEC 60079-29-1:2016 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the detection and measurement of flammable gas or vapour concentrations with air. The equipment, or parts thereof, is intended for use in explosive atmospheres and in mines susceptible to firedamp. This second edition of IEC 60079-29-1 cancels and replaces the first edition of IEC 60079-29-1:2007 series and constitutes a technical revision. Refer to the Forward of the document for a listing of the extensive changes between this edition and the previous edition. Keywords: detection and measurement of flammable gas or vapour concentrations with air, explosive atmospheres, mines susceptible to firedamp, explosion hazard

标准预览图