IEC 62282-4-102:2022 燃料电池技术.第4-102部分:电动工业卡车用燃料电池动力系统.性能试验方法

标准编号：IEC 62282-4-102:2022

中文名称：燃料电池技术.第4-102部分:电动工业卡车用燃料电池动力系统.性能试验方法

英文名称：Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods

发布日期：2022-12-20

标准范围

IEC 62282-4-102:2022作为IEC 62282-4-102:2022 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 62282-4-102:2022规定了用于推进和辅助动力装置(APU)的燃料电池动力系统的性能测试方法。本文件涵盖道路车辆以外的推进用燃料电池动力系统。本文件适用于电动工业卡车的气态氢燃料电池动力系统和直接甲醇燃料电池动力系统。以下燃料被认为属于本文件的范围:-气态氢，和-甲醇。本文件涵盖了3.7和图1中定义的燃料电池动力系统。本文件适用于室内和室外使用的额定输出电压不超过DC 150 V的DC型燃料电池动力系统。本文件涵盖燃料源容器永久连接到工业卡车或燃料电池动力系统的燃料电池动力系统。这第二版取消并取代了2017年出版的第一版。与上一版相比，此版本包括以下重大技术变更:a.范围与IEC 62282-4-101:2022第二版的一致性；b.删除术语和定义（先前条目3.5、3.10和3.15）；c.在第3条中增加新术语:“输送电力”（3.13）和“再生电力”（3.14）；d.根据IEC 62282-3-201修订符号及其含义；e.如第5条所示，将“参考条件”替换为“标准条件”；f.附件负载电压尖峰试验测试方法的修订（13。3.2);g.在第14条（运行中的功率稳定性）中增加澄清；h.增加本文件（附件C）中涉及的绩效标准清单。

IEC 62282-4-102:2022 is available as IEC 62282-4-102:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62282-4-102:2022 specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). This document covers fuel cell power systems for propulsion other than those for road vehicles. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document:
- gaseous hydrogen, and
- methanol.
This document covers the fuel cell power system as defined in 3.7 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding DC 150 V for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system.
This second edition cancels and replaces the first edition published in 2017. This edition includes the following significant technical changes with respect to the previous edition:
a. alignment of the Scope with the second edition of IEC 62282-4-101:2022;
b. deletion of terms and definitions (previous entries 3.5, 3.10, and 3.15);
c. addition of new terms in Clause 3: "delivered power" (3.13) and "regenerated power" (3.14);
d. revision of symbols and their meanings in alignment with those of IEC 62282-3-201;
e. replacement of "reference conditions" with "standard conditions" as seen in Clause 5;
f. revision of the test method for the accessory load voltage spike test (13.3.2);
g. addition of clarifications in Clause 14 (Power stability under operation);
h. addition of a checklist for performance criteria dealt with in this document (Annex C).

标准预览图