IEC 61010-2-012:2016 测量 控制和实验室用电气设备的安全要求 - 第2-012部分:气候和环境试验及其他温度调节设备的特殊要求

标准编号：IEC 61010-2-012:2016

中文名称：测量 控制和实验室用电气设备的安全要求 - 第2-012部分:气候和环境试验及其他温度调节设备的特殊要求

英文名称：Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment

发布日期：2016-07-12

标准范围

IEC 61010-2-012:20 16规定了a)至c)类电气设备及其附件的安全要求，无论其预期用于何处，只要该设备包含以下一个或多个特性:-制冷系统，其作用于集成加热功能或受集成加热功能影响，使得组合的加热和冷却系统产生比单独处理的两个系统的危害更多和/或更严重的危害。-在预期应用中被处理的材料将显著的热量引入到制冷系统中，如果仅在最大额定环境下操作，则应用中的冷却系统产生比冷却系统更多和/或更严重的危险。-用于呈现额外危害的被处理材料的辐照功能。-将被处理的材料暴露于过量的湿度、二氧化碳、盐雾或其他可能导致额外危害的物质的功能。-存在额外危险的机械运动的功能。-提供操作员走进操作区域以装载或卸载正在处理的材料。根据IEC指南104，它具有团体安全出版物的地位。本出版物应与IEC 61010-1:20 10一起阅读。

IEC 61010-2-012:2016 specifies safety requirements for electrical equipment and their accessories within the categories a) through c), wherever they are intended to be used, whenever that equipment incorporates one or more of the following characteristics:
- A REFRIGERATING SYSTEM that is acted on or impacted by an integral heating function such that the combined heating and cooling system generates additional and/or more severe HAZARDS than those for the two systems if treated separately.
- The materials being treated in the intended application introduce significant heat into the REFRIGERATING SYSTEM that the cooling system in the application yield additional and/or more severe HAZARDS than those for the cooling system if operated at the maximum RATED ambient alone.
- An irradiation function for the materials being treated presenting additional HAZARDS.
- A function to expose the materials being treated to excessive humidity, carbon dioxide, salt mist, or other substances which may result in additional HAZARDS.
- A function of MECHANICAL MOVEMENT presenting additional HAZARDS.
- Provision for an OPERATOR to walk-in to the operating area to load or unload the materials being treated.
It has the status of a group safety publication in accordance with IEC Guide 104.

This publication is to be read in conjunction with IEC 61010-1:2010.

标准预览图