IEC 60060-1:2010 高压测试技术 - 第1部分:一般定义和测试要求

标准编号：IEC 60060-1:2010

中文名称：高压测试技术 - 第1部分:一般定义和测试要求

英文名称：High-voltage test techniques - Part 1: General definitions and test requirements

发布日期：2010-09-29

标准范围

IEC 60060-1:20 10适用于交流电压的介电测试；直流电压介电测试；脉冲电压介电测试和上述组合的介电测试。本文件适用于最高电压高于1 kV的设备Um的测试。第三版取消并取代1989年出版的第二版，构成技术修订。与上一版相比的主要技术变化如下:-删除了IEC 60507中描述的人工污染测试程序，-脉冲电流的测量已转移到电流测量的新标准（IEC 62475），-大气校正系数现以公式形式提出。

IEC 60060-1:2010 applies to dielectric tests with alternating voltage; dielectric tests with direct voltage; dielectric tests with impulse voltage and dielectric tests with combinations of the above. This document is applicable to tests on equipment having its highest voltage for equipment Um above 1 kV. The third edition cancels and replaces the second edition, published in 1989, and constitutes a technical revision. The major technical changes with respect to the previous edition are as follows:
- artifical pollution test procedures were removed as they are now described in IEC 60507,
- measurement of impulse current has been transferred to a new standard on current measurement (IEC 62475),
- the atmospheric correction factors are now presented as formulas.

标准预览图