IEC 62282-8-201:2020 燃料电池技术.第8-201部分:反向模式下使用燃料电池组件的能量储存系统.功率转换系统性能的试验程序

标准编号：IEC 62282-8-201:2020

中文名称：燃料电池技术.第8-201部分:反向模式下使用燃料电池组件的能量储存系统.功率转换系统性能的试验程序

英文名称：Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems

发布日期：2020-01-10

标准范围

IEC 62282-8-201:2020定义了使用氢的电能存储系统典型性能的评估方法。这适用于使用电化学反应装置进行电力充电和放电的系统。本文件适用于设计和用于在固定位置（室内和室外）维修和操作的系统。使用氢的电能存储系统的概念配置如图1和图2所示。图1所示为独立配备电解槽模块和燃料电池模块的系统。图2显示了配备可逆电池模块的系统。存在电解槽、储氢器和燃料电池，或者可逆电池、储氢器和整体管理系统(其可以包括压力管理)作为不可或缺的部件。可存在电池、氧气储存器、热管理系统(其可包括热储存器)和水管理系统(其可包括水储存器)作为可选部件。性能测量在由外部粗实线正方形（系统边界）包围的区域中执行。

IEC 62282-8-201:2020 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. This is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor).
The conceptual configurations of the electric energy storage systems using hydrogen are shown in Figure 1 and Figure 2. Figure 1 shows the system independently equipped with an electrolyser module and a fuel cell module. Figure 2 shows the system equipped with a reversible cell module. There are an electrolyser, a hydrogen storage and a fuel cell, or a reversible cell, a hydrogen storage and an overall management system (which may include a pressure management) as indispensable components. There may be a battery, an oxygen storage, a heat management system (which may include a heat storage) and a water management system (which may include a water storage) as optional components. The performance measurement is executed in the area surrounded by the outside thick solid line square (system boundary).

标准预览图