IEC 61290-1-1:2015 光学放大器.试验方法.第1-1部分:功率和增益参数.光谱分析仪法

标准编号：IEC 61290-1-1:2015

中文名称：光学放大器.试验方法.第1-1部分:功率和增益参数.光谱分析仪法

英文名称：Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

发布日期：2015-05-07

标准范围

IEC 61290-1-1:20 15适用于所有市售光放大器（OA）和光放大模块。它适用于使用光泵浦光纤的OAs（基于稀土掺杂光纤或拉曼效应的OFAs）、半导体OAs（SOAs）和平面光波导放大器（POWAs）。本标准的目的是为通过光谱分析仪测试方法准确可靠地测量IEC 61291-1中定义的下列OA参数建立统一要求:-标称输出信号功率；-增益；-偏振相关增益；-最大输出信号功率；-最大总输出功率。本标准专门针对单通道放大器。对于多通道放大器，应参考IEC 61290-10系列。本第三版取消并取代2006年出版的第二版，构成技术修订。与上一版相比，该版本包括以下重大技术变化:测量设备特性的更新和已寻址光放大器参数的修订列表。关键词:光放大器光谱仪测试单通道放大器

IEC 61290-1-1:2015 applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs) and planar optical waveguide amplifiers (POWAs). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1:
- nominal output signal power;
- gain;
- polarization-dependent gain;
- maximum output signal power;
- maximum total output power. The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series. This third edition cancels and replaces the second edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: updates on the characteristics of measurement apparatus and revised list of addressed optical amplifier parameters.Keywords: optical amplifiers, optical spectrum analyzer test, single-channel amplifiers

标准预览图