IEC 63171-6:2021 电气和电子设备连接器第6部分:频率高达600MHz的电力和数据传输用2路和4路（数据/电源）屏蔽自由和固定连接器详细规范

标准编号：IEC 63171-6:2021

中文名称：电气和电子设备连接器第6部分:频率高达600MHz的电力和数据传输用2路和4路（数据/电源）屏蔽自由和固定连接器详细规范

英文名称：Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz

发布日期：2021-10-28

标准范围

IEC 63171-6:20 21涵盖了用于频率高达600 MHz的数据传输的2路和4路（数据/电源）、屏蔽、自由和固定连接器，并规定了通用尺寸、机械、电气和传输特性、环境要求以及测试规范。这第二版取消并取代了2020年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:a)交配条件改变，见图2、图4、图13、图15、图19和图21。b）增加了耐压要求，2 250 V DC，参见5.7.2。c）增加了机械冲击要求，参见5.7.6（由于表14的试验EP3的规范仍与Ed1相同，Ed1已经间接规定了该要求本身）。d)添加样式6P-M8CI和6J-M8CI，参见表1。

IEC 63171-6:2021 covers 2-way and 4-way (data/power), shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz and specifies the common dimensions, mechanical, electrical and transmission characteristics and environmental requirements as well as test specifications.
This second edition cancels and replaces the first edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Mating conditions changed, see Figure 2, Figure 4, Figure 13, Figure 15, Figure 19 and Figure 21.
b) Voltage proof requirement added, 2 250 V DC, see 5.7.2.
c) Mechanical shock requirement added, see 5.7.6 (the requirement itself already was specified indirectly by Ed1 due to the specification of the test EP3 of Table 14 which is still identical to Ed1).
d) Styles added, 6P-M8CI and 6J-M8CI, see Table 1.

标准预览图