IEC 61753-081-02:2023 光纤互连器件和无源元件.性能标准.第081-02部分:C类非连接器化单模光纤中型1xN DWDM器件.受控环境

标准编号：IEC 61753-081-02:2023

中文名称：光纤互连器件和无源元件.性能标准.第081-02部分:C类非连接器化单模光纤中型1xN DWDM器件.受控环境

英文名称：Fibre optic interconnecting devices and passive components - Performance standard - Part 081-02: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments

发布日期：2023-11-16

标准范围

IEC 61753-081-02:20 23包含通道间距为50 GHz、100 GHz或200 GHz的光纤中型1 × N（16≤N≤64）DWDM（密集波分复用）阵列波导光栅器件满足的最低初始测试和测量要求和严重性，以便被归类为满足C类（受控环境）的要求。给出了具有高斯通带轮廓和平顶通带轮廓的DWDM器件的要求。这些要求不包括具有动态电气温度控制的设备。第一版取消并取代了2014年发布的IEC 61753-081-2。本版构成技术修订版。本版本包括以下与IEC 61753-081-2:20 14相关的重大技术变更:a)符合IEC 61753-1:20 18的试验条件变更；b)表2至表4中的测量不确定度与IEC 61753-081-03和IEC 61753-081-06的协调。

IEC 61753-081-02:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category C (controlled environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control. This first edition cancels and replaces IEC 61753-081-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-081-2:2014:
a) change of test conditions harmonizing with IEC 61753-1:2018;
b) harmonization of the measurement uncertainties in Table 2 to Table 4 with IEC 61753-081-03 and IEC 61753-081-06.

标准预览图