IEC 61810-2-1:2017 机电基本继电器.第2-1部分:可靠性.B₁₀值的验证程序

标准编号：IEC 61810-2-1:2017

中文名称：机电基本继电器.第2-1部分:可靠性.B₁₀值的验证程序

英文名称：Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B₁₀ values

发布日期：2017-05-30

标准范围

当可靠性验证的增强要求适用时，IEC 61810-2-1:20 17规定了机电初级继电器的可靠性测试程序。根据IEC 62061和ISO 13849-1，对机械安全相关控制系统中的继电器给出了特殊规定。对于此类继电器，危险故障的B10值（B10D值）源自本文件规定的试验。与上一版相比，此版本包括以下重大技术变更:-在第5条中将试验限制为10米循环；-在特定情况下，将所需测试样本数目减少至5个；-根据条款4引入WeiBayes分析用于常规测试。

IEC 61810-2-1:2017 specifies reliability test procedures for electromechanical elementary relays when enhanced requirements for the verification of reliability apply.
Particular provisions are given for relays incorporated in safety-related control systems of machinery in accordance with IEC 62061 and ISO 13849-1. For such relays, B₁₀ values for dangerous failures (B_10D values) are derived from the tests specified in this document.
This edition includes the following significant technical changes with respect to the previous edition:
- limitation of tests to 10 M cycles in Clause 5;
- reduction of required number of test samples to 5 in specified cases;
- introduction of WeiBayes analysis for routine test under Clause 4.

标准预览图