IEC 60598-1:2020 灯具.第1部分:一般要求和试验

标准编号：IEC 60598-1:2020

中文名称：灯具.第1部分:一般要求和试验

英文名称：Luminaires - Part 1: General requirements and tests

发布日期：2020-08-17

标准范围

IEC 60598-1:20 20作为IEC 60598-1:20 20 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60598-1:20 20规定了灯具的一般要求，包括在高达1 000 V的电源电压下工作的电光源。本文件的要求和相关试验涵盖:分类、标记、机械构造、电气构造和光生物安全。本第九版取消并取代了2014年发布的第八版和修正案1:20 17。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-修订第4.30条，固定覆盖非-用户可更换光源；-子条款4.24.2，蓝光危害:风险组0的移除；-子条款5.2.16:与IEC 61984相关的AC电源设备入口的附加要求；-增加子条款3.3.25，电缆的紫外线防护；-增加第4.34条，包括EMF安全要求（IEC 62493）；-修订功能接地和保护性接地的要求；-增加第4.35条，防止快速旋转部件；-修订第3.2条，额定电压标记；-修订子条款5.2.10，脐带锚固；-修订关于接触电流和保护导体电流测试设置的附录G；-增加了对恒定光输出功能和可编程电流输出的要求；-修订子条款8.2.3 c)，中断直流电压的接触电压限制；-引入PELV；-引入灯具以太网供电连接(PoE)；-第9节，IPX9的介绍；-增加关于壁挂式灯具的子条款3.3.26；-修订附录D，引入ta标记高于25°C的灯具的替代热测试；-修订表10.3和子条款3.3.19保护导体电流限值；-轨道安装灯具:交叉参考IEC 60570:2003/AMD2:2019的附录A；-修订子条款10.2.2，替代直流电强度试验；-修订嵌入式灯具附件D；-子条款4.12.5:金属压盖扭矩试验表4.2的修订；-修订灯具中桥接电容器的使用；-修改III类插头的电气连接。

IEC 60598-1:2020 is available as IEC 60598-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60598-1:2020 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety. This ninth edition cancels and replaces the eighth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Revision of Clause 4.30, Fixing cover live parts of non-user replaceable light source;
- Subclause 4.24.2, Blue Light Hazard: removal of Risk Group 0;
- Subclause 5.2.16: additional requirements for AC mains appliance inlets related to IEC 61984;
- Addition of Subclause 3.3.25, UV protection of cable;
- Addition of Clause 4.34, Inclusion of EMF safety requirements (IEC 62493);
- Revision of the requirements for functional earth and protective earth;
- Addition of Clause 4.35, Protection against fast rotating parts;
- Revision of Clause 3.2, Rated voltage marking;
- Revision of Subclause 5.2.10, Cord anchorage;
- Revision of Annex G for touch current and protective conductor current test set-up;
- Addition of requirements for constant light output function and programmable current output;
- Revision of Subclause 8.2.3 c), touch voltage limits for interrupted DC voltage;
- Introduction of PELV;
- Introduction of Ethernet power supply connection for luminaires (PoE);
- Section 9, Introduction of IPX9;
- Addition of Subclause 3.3.26 for wall mounted luminaires;
- Revision of Annex D introducing alternative thermal tests for luminaires with ta marking higher than 25°C;
- Revision of Table 10.3 and Subclause 3.3.19 for protective conductor current limits;
- Track-mounted luminaires: cross reference to Annex A of IEC 60570:2003/AMD2:2019;
- Revision of Subclause 10.2.2, alternative DC electric strength test;
- Revision of Annex D for recessed luminaires;
- Subclause 4.12.5: revision of Table 4.2 for torque test on metal glands;
- Revision of use of bridging capacitors in luminaires;
- Revision of electrical connection to class III plugs.

标准预览图