IEC 61300-1:2022 纤维光学互连器件和无源元件基本试验和测量程序第1部分:总则和指南

标准编号：IEC 61300-1:2022

中文名称：纤维光学互连器件和无源元件基本试验和测量程序第1部分:总则和指南

英文名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

发布日期：2022-04-04

标准范围

IEC 61300-1:20 22作为IEC 61300-1:20 22 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 61300-1:20 22提供了一般信息和指导IEC 61300-2（所有部分）和IEC 61300-3（所有部分）中定义的互连设备、无源元件、机械接头、熔接保护器、光纤管理系统和保护外壳的基本测试和测量程序。本文件与相关规范结合使用，相关规范定义了要使用的测试、每个测试所需的严重程度、其顺序（如果相关）以及允许的性能限值。如果本文件与相关规范有冲突，则以后者为准。这第五版取消并取代了2016年出版的第四版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-在4.2.1中增加了测量不确定度的信息；-4.2.2中衰减变化要求的变更；-在10.4中增加了除A1-OM2、A1-OM3、A1-OM4、A1-OM5和A3e之外的其他光纤的多模发射条件；-在10.6中添加平面波导的多模发射条件；-拆分EF的附件A和EAF的附件B；-修正环绕通量和环绕角通量定义中的错误。

IEC 61300-1:2022 is available as IEC 61300-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61300-1:2022 provides general information and guidance for the basic test and measurement procedures defined in IEC 61300-2 (all parts) and IEC 61300-3 (all parts) for interconnecting devices, passive components, mechanical splices, fusion splice protectors, fibre management systems and protective housings. This document is used in combination with the relevant specification which defines the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this document and the relevant specification, the latter takes precedence. This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of the information of measurement uncertainties in 4.2.1;
- change of the requirements for attenuation variation in 4.2.2;
- addition of the multimode launch conditions of other fibres than A1-OM2, A1-OM3, A1-OM4, A1-OM5 and A3e in 10.4;
- addition of the multimode launch conditions of the planer waveguide in 10.6;
- splitting Annex A for EF and Annex B for EAF;
- correction of errors in the definitions of encircled flux and encircled angular flux.

标准预览图