IEC 60335-2-107:2017 家用和类似用途电器的安全 第2-107部分:机器人电池供电电动割草机的特殊要求

标准编号：IEC 60335-2-107:2017

中文名称：家用和类似用途电器的安全 第2-107部分:机器人电池供电电动割草机的特殊要求

英文名称：Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

发布日期：2017-12-15

标准范围

IEC 60335-2-107:2017规定了电池额定电压不超过75 V DC的机器人电池供电电动旋转式割草机及其外围设备的设计和构造的安全要求及其验证。除噪声外，本标准未考虑EMC和环境方面。本文件不适用于与内燃机、混合动力和燃料电池动力机器以及相关充电系统相关的附加风险。本文件涉及电池供电的机器人割草机及其外围设备在按预期使用和在合理可预见的误用条件下出现的所有重大危险。在整个本文档中，术语机器用于指代与其充电站分开的机器人割草机。本文件还规定了电源供电的充电站和周界分隔符信号源的安全要求。机器人割草机的附加电池操作和充电要求，包括锂离子电池的充电，在附件KK中规定，该附件取代了第1部分的附件B和S（非充电电池的要求除外）。本文件不适用于IEC发布本文件日期之前制造的机器。第二版取消并替换了2012年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-第7条:标记和说明、对标记、警告和说明手册的新要求；-第8条:防止接触带电部件，对危险电池电压的电击保护的新要求；-第20条:稳定性和机械危害，对手动控制器、手动停止、切割装置停止时间、牵引驱动停止和重新启动程序的修订要求，以及新的站立儿童足部探头测试；-第22条:结构，对禁用装置、工作区域、周界分隔符、传感器和手动控制器的修订要求，以及对用于充电的机器连接器和用作障碍物传感装置的接触表面的新要求；-第24条:组件、开关的修订要求和-第29条:间隙、爬电距离和固体绝缘，对机器和非-的修订要求电源供电的外围设备。该标准系列是涉及电器安全的产品系列标准系列，优先于涵盖同一主题的横向和通用标准。本出版物将与IEC 60335-1第五版（2010年）及其修正案一起使用。关键词:手持工具机器人电池供电电动割草机安全

IEC 60335-2-107:2017 specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c.
EMC and environmental aspects, except noise, have not been considered in this standard.
This document does not apply to the additional risks associated with internal combustion engine(s), hybrid and fuel cell powered machines and associated charging systems.
This document deals with all the significant hazards presented by battery powered robotic lawnmowers and their peripherals when they are used as intended and under conditions of misuse which are reasonably foreseeable.
Throughout this document, the term machine is used to refer to the robotic lawnmower, separate from its charging station.
This document also provides requirements for the safety of mains powered charging stations and signal sources for perimeter delimiters.
Additional battery operation and charging requirements for robotic lawnmowers, including the charging of lithium ion batteries, are specified in Annex KK which replaces Annexes B and S (except for requirements for non-rechargeable batteries) of Part 1.
This document is not applicable to machines which are manufactured before the date of publication of this document by IEC.
This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Clause 7: Markings and instructions, new requirements for markings, warnings and the instruction manual;
- Clause 8: Protection against access to live parts, new requirements for protection against electric shock for hazardous battery voltages;
- Clause 20: Stability and mechanical hazards, revised requirements for manual controller, manual stop, cutting means stopping time, traction drive stopping and restart procedures, as well as a new standing child foot probe test;
- Clause 22: Construction, revised requirements for disabling devices, working area, perimeter delimiter, sensors and manual controller, as well as new requirements for machine connectors used for charging and contact surfaces used as obstruction sensing devices;
- Clause 24: Components, revised requirements for switches and
- Clause 29: Clearances, creepage distances and solid insulation, revised requirements for the machine and non-mains-powered peripherals.
This standard series is a product family standard series dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject.
This publication is to be used in conjunction with the fifth edition (2010) of IEC 60335-1 and its amendments.
Keywords: Hand-held tools, Robotic Battery Powered Electrical Lawnmowers, Safety

标准预览图