IEC TS 62715-5-2:2016 柔性显示设备第5-2部分:从曲线显示器有利位置测量光学特性的方法

标准编号：IEC TS 62715-5-2:2016

中文名称：柔性显示设备第5-2部分:从曲线显示器有利位置测量光学特性的方法

英文名称：Flexible display devices - Part 5-2: Measuring methods of optical characteristics from the vantage point for curved displays

发布日期：2016-04-26

标准范围

IEC TS 62715-5-2:20 16（E）规定了在暗室条件下从固定点（所谓的有利位置）对弯曲发射型和透射型显示器（如OLED和LCD）进行光学测量方法的一般规则和细节。本文档集中于围绕具有固定或可变曲率半径的水平和/或垂直轴的凹形大屏幕显示器（非便携式）。本技术规范规定的测量方法适用于以下状态下的曲面显示模组:-根据视角的有利位置亮度变化-根据视角的有利位置对比度变化-白色的有利点色度随视角的变化-有利位置色域面积随视角的变化-原色通过视角的有利点色度变化-亮度均匀性及其通过视角的均匀性变化-色度均匀性及其通过视角的均匀性变化-半亮度视角-半对比度视角。

IEC TS 62715-5-2:2016(E) specifies the general rules and the details of optical measuring methods from a fixed point (the so-called vantage point) for curved emissive and transmissive type displays such as OLED and LCD in dark room conditions. This document focuses on concave shape large screen displays (non-portable) around a horizontal and/or vertical axis with fixed or variable curvature radius. The measuring method stipulated in this technical specification is applied to the curved display modules under the following states:
- vantage-point luminance variation by viewing angles
- vantage-point contrast ratio variation by viewing angles
- vantage-point chromaticity variation of white colour by viewing angles
- vantage-point colour gamut area variation by viewing angles
- vantage-point chromaticity variation of primary colours by viewing angles
- luminance uniformity and its uniformity variation by viewing angles
- chromaticity uniformity and its uniformity variation by viewing angles
- viewing angle of half-luminance
- viewing angle of half-contrast.

标准预览图