IEC 61340-2-3:2016 静电学第2-3部分:确定用于避免静电电荷累积的固体材料的电阻和电阻率的测试方法
标准编号：IEC 61340-2-3:2016
中文名称：静电学第2-3部分:确定用于避免静电电荷累积的固体材料的电阻和电阻率的测试方法
英文名称：Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
发布日期：2016-06-23
标准范围
IEC 61340-2-3:20 16可作为IEC 61340-2-3:20 16获得包含国际标准及其红线的RLV版本，显示技术内容与上一版。IEC 61340-2-3:20 16描述了用于确定用于避免静电电荷积累的固体材料的电阻和电阻率的测试方法，其中测量的电阻在10K欧姆至1T欧姆的范围内。它考虑了现有的IEC/ISO标准和其他已发布的信息，并就适当的方法给出了建议和指南。与上一版相比，此版本包括以下重大技术变更:a)对用于实验室评估的仪器、用于验收测试的仪器和用于符合性验证（定期测试）的仪器进行了区分；b)描述了替代的电极组件，其可用于非平面产品上或当被测产品的尺寸太小而不能使用较大的电极组件时；c)计算表面和体积电阻率的公式已被修改，以符合IEC 61340系列主要应用领域的通用行业惯例。
IEC 61340-2-3:2016 is available as
IEC 61340-2-3:2016 describes test methods for the determination of the electrical resistance and resistivity of solid materials used to avoid electrostatic charge accumulation, in which the measured resistance is in the range 10K Ohm to 1T Ohm. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method. This edition includes the following significant technical changes with respect to the previous edition:
a) a distinction has been introduced between instrumentation used for laboratory evaluations, instrumentation used for acceptance testing and instrumentation used for compliance verification (periodic testing);
b) an alternative electrode assembly is described, which can be used on non-planar products or when the dimensions of the product under test are too small to allow the larger electrode assembly to be used;
c) the formulae for calculating surface and volume resistivity have been modified to correspond with common industry practice in the main areas of application for the IEC 61340 series.
标准预览图
