IEC TS 62600-3:2020 海洋能源.波浪、潮汐和其他水流转换器.第3部分:机械负荷的测量

标准编号：IEC TS 62600-3:2020

中文名称：海洋能源.波浪、潮汐和其他水流转换器.第3部分:机械负荷的测量

英文名称：Marine energy - Wave, tidal and other water current converters - Part 3: Measurement of mechanical loads

发布日期：2020-05-14

标准范围

IEC TS 62600-3:20 20描述了用于负载模拟模型验证和认证的流体动力海洋能量转换器（例如波浪、潮汐和其他水流转换器（包括河流水流转换器））上机械负载的测量。本文件包含机械载荷测量的要求和建议，用于现场选择、被测对象选择、数据采集、校准、数据验证、测量载荷情况、捕获矩阵、后处理、不确定度确定和报告等活动。本文件还定义了子系统或部件的全尺寸结构测试的要求，特别关注船用能量转换器转子叶片的全尺寸结构测试以及所获得测试结果的解释和评估。本文件侧重于与叶片结构完整性评估相关的测试方面。测试的目的是在可接受的概率水平上确认叶片类型的整个安装产品满足设计假设。

IEC TS 62600-3:2020 describes the measurement of mechanical loads on hydrodynamic marine energy converters such as wave, tidal and other water current converters (including river current converters) for the purpose of load simulation model validation and certification. This document contains the requirements and recommendations for the measurement of mechanical loads for such activities as site selection, measurand selection, data acquisition, calibration, data verification, measurement load cases, capture matrix, post-processing, uncertainty determination and reporting.
This document also defines the requirements for full-scale structural testing of subsystems or parts with a special focus on full-scale structural testing of marine energy converter rotor blades and for the interpretation and evaluation of achieved test results. This document focuses on aspects of testing related to an evaluation of the structural integrity of the blade. The purpose of the tests is to confirm to an acceptable level of probability that the whole installed production of a blade type fulfils the design assumptions.

标准预览图