IEC 62320-1:2015 海上导航和无线电通信设备与系统 - 自动识别系统（Ais） - 第1部分:Ais基站 - 最低操作和性能要求 测试方法和所需测试结果

标准编号：IEC 62320-1:2015

中文名称：海上导航和无线电通信设备与系统 - 自动识别系统（Ais） - 第1部分:Ais基站 - 最低操作和性能要求 测试方法和所需测试结果

英文名称：Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results

发布日期：2015-01-20

标准范围

IEC 62320-1:20 15（E）规定了AIS基站的最低操作和性能要求、测试方法和所需测试结果，与IMO决议MSC.74（69）附件3通用AIS采用的性能标准兼容。它结合了ITU-R M.1371建议和IALA建议A-124中包含的非船载固定站AIS设备的技术特性。在适用的情况下，它还考虑到国际电联无线电条例。本标准考虑了其他相关的IEC国际标准和现有国家标准（如适用）。本标准适用于AIS基站。它不包括岸上显示AIS数据的规范。本第二版取消并取代2007年出版的第一版及其修正案1:2008.本版是技术性修订。与上一版相比，此版本包括以下重大技术变更:-纳入ITU R M.1371 5建议中包含的技术特征；-将BCE、BCF和CAB句改为BCG、BCL和RST；-注释块被标记块替换；-添加消息26的调度广播；-添加了消息27控件；-与ITU协调的发射机互调衰减；-移除12.5 kHz信道操作；-消息24A、消息25和消息26的传输被添加；-添加了启用VSI和标签块的90%通道负载测试。

IEC 62320-1:2015(E) specifies the minimum operational and performance requirements, methods of testing and required test results for AIS Base Stations, compatible with the performance standards adopted by IMO Resolution MSC.74 (69), Annex 3, Universal AIS. It incorporates the technical characteristics of non-shipborne, fixed station AIS equipment, included in recommendation ITU-R M.1371 and IALA Recommendation A-124. Where applicable, it also takes into account the ITU Radio Regulations. This standard takes into account other associated IEC international standards and existing national standards, as applicable. This standard is applicable for AIS Base Stations. It does not include specifications for the display of AIS data on shore. This second edition cancels and replaces the first edition published in 2007 and its Amendment 1:2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- incorporation of the technical characteristics included in Recommendation ITU R M.1371 5;
- the BCE, BCF and CAB sentences replaced with BCG, BCL and RST;
- comment blocks replaced with TAG blocks;
- scheduled broadcast of Message 26 added;
- Message 27 control added;
- transmitter intermodulation attenuation harmonised with ITU;
- 12,5 kHz channel operation removed;
- transmission of Message 24A, Message 25 and Message 26 added;
- 90 % channel load test with VSI and TAG blocks enabled added.

标准预览图