ISO 4613-1:1993 塑料.醋酸乙烯/乙烯酯（E/VAC）模压和挤压材料.第1部分：名称和规范

标准编号：ISO 4613-1:1993

中文名称：塑料.醋酸乙烯/乙烯酯（E/VAC）模压和挤压材料.第1部分：名称和规范

英文名称：Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 1: Designation and specification

发布日期：1993-10

标准范围

E/VAC塑料的类型通过一个分类系统相互区分，该分类系统基于醋酸乙烯含量和熔体流动速率的适当指定性能水平，以及关于预期应用和/或加工方法、重要性能、添加剂、着色剂、填料和补强材料的信息。适用于所有含有3%（m/m）至50%（m/m）醋酸乙烯酯的E/VAC共聚物。适用于以粉末、颗粒或颗粒形式准备好正常使用的材料，以及未改性或未经着色剂、添加剂、填料等改性的材料。

The types of E/VAC plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties vinyl acetate content and melt flow rate and on information about intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. Applies to all E/VAC copolymers containing from 3 % (m/m) to 50 % (m/m) of vinyl acetate. Is applicable to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.

标准预览图