ISO 8820-5:2007 道路车辆 熔断片 第5部分：带SF30和SF51型轴向终端及试验夹具的熔断片

标准编号：ISO 8820-5:2007

中文名称：道路车辆 熔断片 第5部分：带SF30和SF51型轴向终端及试验夹具的熔断片

英文名称：Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

发布日期：2007-03

标准范围

ISO 8820-5:2007规定了SF30和SF51型带轴向端子（条形熔断器）的熔断器以及道路车辆中熔断器的试验夹具。它为这些熔断器类型确定了额定电流、试验程序、性能要求和尺寸。ISO 8820-5:2007适用于额定电压为32 V、额定电流为30 a至500 a、断开容量为2000 a的熔断器，用于标称电压为12 V和/或24 V的道路车辆电气系统。ISO 8820-5:2007旨在与ISO 8820结合使用-1和ISO 8820-2。其条款编号与ISO 8820-1一致，其要求适用，除非根据ISO 8820-5:2007的特殊要求进行修改。

ISO 8820-5:2007 specifies fuse-links with axial terminals (Strip fuse-links) Type SF30 and SF51 and test fixtures for fuses in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions.ISO 8820-5:2007 is applicable to fuse-links with a rated voltage of 32 V, a current rating of 30 A to 500 A and a breaking capacity of 2000 A intended for use in the electrical system of road vehicles with a nominal voltage of 12 V and/or 24 V.ISO 8820-5:2007 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to ISO 8820-5:2007.

标准预览图