ISO 6953-1:2024 气压传动 压缩空气调压阀和带过滤器的调压阀 第1部分：商务文件中应包含的主要特性和产品标识要求

标准编号：ISO 6953-1:2024

中文名称：气压传动 压缩空气调压阀和带过滤器的调压阀 第1部分：商务文件中应包含的主要特性和产品标识要求

英文名称：Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to include in supplier's literature and product-marking requirements

发布日期：2024-01

标准范围

本文件规定了供应商提供的资料中需要包括哪些压缩空气压力调节器的特性。它也适用于过滤调节器。本文件适用于:—？手动控制的直接操作型（带泄压调节器等泄压机构，或不带泄压机构），—？手动控制的内部先导操作类型（例如喷嘴挡板），以及—？压力先导操作型。此外，它还规定了压力调节器和过滤调节器的产品标记要求。本文件适用于额定进口压力高达2 500 kPa（25 bar）的压缩空气压力调节器？出口调节压力可达1？600？kPa（16？bar）以及额定入口和出口压力高达1？600？kPa（16？巴），其中主要污染物通过机械手段去除。笔记？供应商有关电调制气动连续压力控制阀的文献中应包括的主要特性在ISO？10094-1.？

This document specifies which characteristics of compressed air pressure regulators are required to be included in the literature from the supplier. It also applies to filter-regulators.

This document applies to:

—    manually controlled direct operated types (with relieving mechanisms such as a relieving pressure regulator, or without relieving mechanism),

—    manually controlled internal pilot operating types (e.g. nozzle flapper), and

—    pressure-pilot operated types.

In addition, it specifies the product marking requirements for pressure regulators and filter-regulators.

This document is applicable to compressed air pressure regulators with a rated inlet pressure of up to 2 500 kPa (25 bar) and an outlet adjustment pressure of up to 1 600 kPa (16 bar) and to filter-regulators with rated inlet and outlet pressures of up to 1 600 kPa (16 bar), in which the major contaminants are removed by mechanical means.

NOTE      The main characteristics to be included in the supplier's literature related to electrically modulated pneumatic continuous pressure control valves are specified in ISO 10094-1.

标准预览图