ISO 262:1998 ISO 一般用途米制螺纹.螺钉,螺栓和螺母的选用尺寸

标准编号：ISO 262:1998

中文名称：ISO 一般用途米制螺纹.螺钉,螺栓和螺母的选用尺寸

英文名称：ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

发布日期：1998-12

标准范围

本国际标准规定了直径范围为1 mm至64 mm的ISO通用公制螺纹（M）的螺钉、螺栓和螺母的选定尺寸，其基本轮廓符合ISO 68-1。这些选定的尺寸也建议用于一般工程用途。这些螺纹选自ISO 261。螺纹名称见ISO 965-1。

This International Standard specifies selected sizes for screws, bolts and nuts in the diameter range from 1 mm to 64 mm of ISO general purpose metric screw threads (M) having basic profile according to ISO 68-1.These selected sizes are recommended also for general engineering use.These screw threads are selected from ISO 261.For thread designations see ISO 965-1.

标准预览图