ISO 10094-2:2021 气压传动 电气压力控制阀 第2部分：确定供应商文件中包含的主要特性的试验方法

标准编号：ISO 10094-2:2021

中文名称：气压传动 电气压力控制阀 第2部分：确定供应商文件中包含的主要特性的试验方法

英文名称：Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature

发布日期：2021-11

标准范围

本文件规定了试验程序和呈现参数相关结果的方法，这些参数定义了供应商的电动气动连续压力控制阀文献中包含的主要特性，符合ISO？10094-1。本文件的目的是:-？通过标准化试验方法和试验结果的呈现，促进比较，以及-？协助在压缩空气系统中正确使用这些部件。规定的试验旨在对不同类型的连续压力控制阀进行比较；这些不是对每个制造产品进行的生产测试。本文件中描述的试验适用于排气口与大气通风的部件。注？1？ISO？6953规定了与非电动调节气动连续压力控制阀相关的试验-2.注2:ISO 10041-2规定了与电动气动连续流量控制阀相关的试验。注？3？ISO？6953-3提供了一种使用等温罐而不是流量计的流量特性替代动态测试方法。然而，该方法仅测量正向流和泄压流特性滞后曲线的下降流速部分。

This document specifies the test procedures and a method of presenting results concerning the parameters which define the main characteristics to be included in the supplier's literature of the electro-pneumatic continuous pressure control valves, conforming to ISO 10094-1.The purpose of this document is:—    to facilitate comparison by standardizing the test methods and the presentation of the test results, and—    to assist in the proper application of these components in compressed air systems.The specified tests are intended to allow comparison between the different types of continuous pressure control valves; these are not production tests to be carried out on each manufactured product.The tests described in this document are for components with an exhaust port vented to the atmosphere.NOTE 1   The tests related to non-electrically modulated pneumatic continuous pressure control valves are specified in ISO 6953-2.NOTE 2   The tests related to electro-pneumatic continuous flow control valves are specified in ISO 10041-2.NOTE 3   ISO 6953-3 provides an alternate dynamic test method for flow-rate characteristics using an isothermal tank instead of a flow meter. However, this method measures only the decreasing flow rate part of the hysteresis curve of the forward flow and relief flow characteristics.

标准预览图