ISO 12643-1:2009 印刷技术 印刷工艺设备和系统的安全要求 第1部分：一般要求

标准编号：ISO 12643-1:2009

中文名称：印刷技术 印刷工艺设备和系统的安全要求 第1部分：一般要求

英文名称：Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements

发布日期：2009-12

标准范围

ISO 12643-1:20 09为印前系统、印刷机系统、装订和整理系统、转换系统和支架中使用的新设备的设计和构造提供了安全规范？单独的压板印刷机。它适用于以独立模式使用的设备，或与其他机器（包括辅助设备）组合使用的设备，其中设备的所有机器致动器（例如驱动器）由相同的控制系统控制。除非另有说明，ISO 12643-1:20 09中给出的要求适用于ISO 12643所有部分涵盖的设备。ISO 12643-1:20 09旨在与ISO 12643的适用部分一起使用，该部分包含特定类型设备的附加要求。ISO 12643-1:20 09解决了以下领域中设备和系统特有的已识别的重大危害:机械的；电气；滑倒、绊倒、跌倒；人体工程学；噪音；紫外线和激光辐射；火灾和爆炸；热；其他类型的排放【如臭氧、墨雾、挥发性有机化合物（VOCs）等。】。ISO 12643-1:20 09中确立的安全原则也可适用于ISO 12643中未规定的技术领域内的设备设计。

ISO 12643-1:2009 provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems and stand？alone platen presses. It is applicable to equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.The requirements given in ISO 12643-1:2009 are applicable to the equipment covered by all parts of ISO 12643, unless otherwise noted. ISO 12643-1:2009 is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.ISO 12643-1:2009 addresses recognized significant hazards specific to equipment and systems in the following areas:

• mechanical;
• electrical;
• slipping, tripping, falling;
• ergonomics;
• noise;
• UV and laser radiation;
• fire and explosion;
• thermal;
• other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].

The safety principles established in ISO 12643-1:2009 can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643.

标准预览图