ISO/IEC 14165-211:1999 信息技术.光纤信道.第211部分：对HIPPI-FP的映射

标准编号：ISO/IEC 14165-211:1999

中文名称：信息技术.光纤信道.第211部分：对HIPPI-FP的映射

英文名称：Information technology — Fibre Channel — Part 211: Mapping to HIPPI-FP (FC-FP)

发布日期：1999-02

标准范围

光纤通道为高级协议（ULP）提供了通用数据传输工具，如智能外围接口（IPI）和小型计算机系统接口（SCSI）命令集、高性能并行接口（HIPPI）数据帧、IP（互联网协议）、ANSI/IEEE 802.2等。ISO/IEC 14165的这一部分定义了所需的帧格式和协议定义传输使用高性能并行的上层协议的信息使用较低层串行链路接口时的接口成帧协议（HIPPI-FP）根据光纤通道物理和信令接口（FC-PH）进行操作以及光纤通道增强型物理（FC-EP）要求。例如当底层物理层光纤通道，并且在底层物理层为HIPPI时将使用HIPPI-FP。

Fibre Channel provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), ANSI/IEEE 802.2, and others.This part of ISO/IEC 14165 defines the frame format and protocol definitions required totransfer information for upper-layer protocols that use the High-Performance ParallelInterface Framing Protocol (HIPPI-FP) when using a lower-layer serial link interfaceoperating according to the Fibre Channel Physical and Signaling Interface (FC-PH)and Fibre Channel Enhanced Physical (FC-EP) requirements. For example, theHIPPI upper-layer protocols would use FC-FP when the underlying physical layer isFibre Channel, and would use HIPPI-FP when the underlying physical layer is HIPPI.

标准预览图