ISO 10360-5:2020 产品几何量技术规范（GPS） 坐标测量机（CMM）的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机

标准编号：ISO 10360-5:2020

中文名称：产品几何量技术规范（GPS） 坐标测量机（CMM）的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机

英文名称：Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus co

发布日期：2020-03

标准范围

本文件规定了接触式探测系统对CMM性能的验收和定期再验证测试，仅适用于使用以下设备的CMM:-任何类型的接触式探测系统；和-球形或半球形笔尖。注:CMM探测性能测试由最大允许误差（MPE）规定，这是因为将探测系统的性能与CMM的性能隔离是不切实际的，即使是在一个小的人工制品（如测试球）上。本文件适用于随以下任何一项提供的坐标测量机:a） 单触针探测系统；b） 多针探测系统，带有固定的多个探针（例如。g、 “星型”触笔；c） 多个探测系统，比如每个探测器都有一个触针；d） 带有发音探测系统的系统；e） 触针和探针更换系统；f） 手动（非驱动）和自动坐标测量机；g） 安装包括扫描探针，能够在扫描模式下使用。本文件不适用于需要不同测试程序的非接触式探测系统。这个词？三坐标测量机和多触针探测系统的组合尺寸误差“已缩短至？为方便起见，多笔笔大小错误。这适用于类似情况。如果希望尽可能隔离探测系统的性能，可以将CMM的影响降至最低，但不能消除。详见附件C。

This document specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using:— any type of contacting probing system; and— spherical or hemispherical stylus tip(s).NOTE CMM probing performance tests are specified by the maximum permissible errors (MPEs), due to the impracticality of isolating the performance of the probing system from that of the CMM, even on a small artefact such as a test sphere.This document applies to CMMs supplied with any of the following:a) single-stylus probing systems;b) multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. "star" stylus);c) multiple probing systems such as those with a stylus for each of their probes;d) systems with articulating probing systems;e) stylus and probe changing systems;f) manual (non-driven) and automated CMMs;g) installations including a scanning probe, capable of being used in a scanning mode.This document is not applicable to non-contacting probing systems, which require different testing procedures.The term?combined CMM and multi-stylus probing system size error' has been shortened to?multi-stylus size error' for convenience. This applies in similar cases.If it is desirable to isolate the probing system performance as far as is practical, the influence of the CMM can be minimized but not eliminated. See Annex C for more information.

标准预览图