ISO 10766:2006 液压传动系统 液压汽缸 活塞及活塞杆用矩形截面轴承套的缸体尺寸

标准编号：ISO 10766:2006

中文名称：液压传动系统 液压汽缸 活塞及活塞杆用矩形截面轴承套的缸体尺寸

英文名称：Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods

发布日期：2006-01

标准范围

ISO 10766:2006规定了图1所示类型的矩形截面切割轴承环的一系列液压缸活塞和连杆壳体的标称尺寸和相关公差的优选范围，适用于以下尺寸范围的应用:对于内径为16毫米至500毫米（含16毫米）的气缸；适用于直径为12毫米至360毫米（含12毫米）的杆。ISO 10766:2006没有给出切割轴承套圈设计的细节，因为切割轴承套圈的构造方式因每个制造商而异。切割轴承套圈和任何结合的抗挤压部件的设计材料由温度和压力等条件决定。

ISO 10766:2006 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Figure 1, for applications in the following range of dimensions:

• for cylinders with bores of 16 mm to 500 mm, inclusive;
• for rods with diameters of 12 mm to 360 mm, inclusive.

ISO 10766:2006 does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer.The design material of cut bearing rings and any incorporated anti-extrusion component are determined by conditions such as temperature and pressure.

标准预览图