ISO 11961:2008 石油和天然气工业 钻探钢管

标准编号：ISO 11961:2008

中文名称：石油和天然气工业 钻探钢管

英文名称：Petroleum and natural gas industries — Steel drill pipe

发布日期：2008-11

标准范围

ISO 11961:2008规定了石油和天然气行业钻井和生产作业中使用的带镦粗管体端部和焊接工具接头的钢钻杆的三个产品规格等级（PSL-1、PSL-2和PSL-3）的交货技术条件。PSL-1的要求构成本ISO 11961:2008的基础，但也给出了定义PSL-2和PSL-3标准技术要求不同级别的要求。ISO 11961:2008涵盖了E级钻杆和高强度X、G和S级钻杆。给出了典型的钻杆配置，显示了主要元件和长度。钻杆等级的主要尺寸和质量以国际单位制和美国单位制给出。ISO 11961:2008也可用于带有ISO或API标准未规定的工具接头的钻杆。根据买方和制造商之间的协议，ISO 11961:2008也适用于其他钻杆主体和/或工具接头尺寸。ISO 11961:2008列出了买方和制造商之间就测试、性能验证和无损检测达成的补充要求。ISO11961:2008没有考虑性能属性。

ISO 11961:2008 specifies the technical delivery conditions for steel drill pipes with upset pipe body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this ISO 11961:2008 but those that define different levels of standard technical requirements for PSL-2 and PSL-3 are also given.ISO 11961:2008 covers grade E drill pipe and the high-strength grades X, G and S.A typical drill pipe configuration is given, showing main elements and lengths. The main dimensions and masses of the grades of drill pipe are given in both SI units and in USC units.ISO 11961:2008 can also be used for drill pipe with tool joints not specified by ISO or API standards.By agreement between purchaser and manufacturer, ISO 11961:2008 can also be applied to other drill-pipe body and/or tool-joint dimensions. ISO 11961:2008 lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination.ISO 11961:2008 does not consider performance properties.

标准预览图