ISO 12128:2001 滑动轴承 注油孔,槽和穴 轴承衬套的尺寸,型号,设计及其运用.

标准编号：ISO 12128:2001

中文名称：滑动轴承 注油孔,槽和穴 轴承衬套的尺寸,型号,设计及其运用.

英文名称：Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes

发布日期：2001-09

标准范围

本国际标准规定了轴承衬套润滑孔、槽和槽的尺寸。可以使用名称示例输入这些尺寸，例如在图纸上。它们的用途取决于环境特别是在特定的操作条件下。此外，它允许用户为滑动轴承衬套分配不同类型的润滑剂供给和分配由铜合金、热固性塑料、热塑性塑料或人造碳制成。注:未规定烧结金属制成的滑动轴承衬套的不同润滑油供给和分配类型因为这些衬套都浸透了润滑剂。由人造碳制成的滑动轴承衬套不使用润滑油进行润滑油或油脂。

This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes.These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends inparticular on the specific operating conditions.In addition, it enables the user to assign the different types of lubricant feed and distribution to plain bearing bushesmade of copper alloys, thermosetting plastics, thermoplastics or of artificial carbon.NOTE Different types of lubricant feed and distribution for plain bearing bushes made of sintered metals have not been specifieddue to the fact that these bushes are soaked with lubricant. Plain bearing bushes made of artificial carbon are not lubricated withoil or grease.

标准预览图