标准编号：ISO 28219:2017
中文名称：包装 带有线性条码和二维符号的标签和直接产品标记
英文名称：Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols
发布日期：2017-09
标准范围
ISO 28219:2017-定义识别项目的最低要求，-提供用机器可读符号标记物品的指南，-涵盖物品的标签和直接标记，-包括标签粘合特性和标记耐久性的测试程序，-为以线性条形码、二维符号或人类可读形式呈现的数据的标签上的格式提供指导，-旨在用于包括但不限于支持在以下过程中自动控制物品的系统的应用:-生产，-库存，-分配，-现场服务，-销售点，-护理点，-修理，以及-旨在包括但不限于多个行业，包括:-汽车，-航空航天，-化学，-消费品，-电子，-医疗保健，-海军，-铁路，-电信。未定义标记的位置和应用方法（这些将在实施ISO 28219:2017之前由供应商和制造商及其贸易伙伴审查并达成一致）。ISO 28219:2017不取代或替换任何适用的安全或监管标记或标签要求。ISO 28219:2017旨在满足众多应用和行业群体的最低项目标记要求，因此其适用性适用于广泛的行业，每个行业都可能有特定的实施指南。除任何其他强制性标签直接标记要求外，还将应用ISO 28219:2017。ISO 28219:2017和其他标准的标签和直接标记要求可以组合成一个标签或标记区域，或者作为单独的标签或标记区域出现。ISO 28219:2017可互换使用术语“零件标记”和“项目标记”。除非另有说明，ISO 28219:2017将使用术语“物品标记”来描述物品的标记和直接零件标记(DPM)，其中DPM包括但不限于改变(例如点喷、激光蚀刻、化学蚀刻)以及添加剂类型工艺(例如喷墨、真空沉积)。ISO 28219:2017的目的是建立机器可读（线性、二维和复合符号）和人类可读的内容，用于项目、零件和组件的直接标记和标签。ISO 28219:2017提供了一种对物品、零件和组件进行标记的方法，并在任何制造商工厂的固定或手持扫描环境中读取，然后由购买物品以用于后续制造操作或最终最终用途的客户读取。预期应用包括但不限于供应链应用，例如库存、分销、制造、质量控制、获取、运输、供应、维修和处置。这些数字是说明性的，不一定按比例或ISO 28219:2017中规定的质量要求。
ISO 28219:2017- defines minimum requirements for identifying items,- provides guidelines for item marking with machine-readable symbols,- covers both labels and direct marking of items,- includes testing procedures for label adhesive characteristics and mark durability,- provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form,- is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of:
- - production,
- - inventory,
- - distribution,
- - field service,
- - point of sale,
- - point of care,
- - repair, and
- is intended to include, but it is not limited to, multiple industries including:
- - automotive,
- - aerospace,
- - chemical,
- - consumer items,
- - electronics,
- - health care,
- - marine,
- - rail,
- - telecommunications.
The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing ISO 28219:2017).ISO 28219:2017 does not supersede or replace any applicable safety or regulatory marking or labelling requirements. ISO 28219:2017 is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. ISO 28219:2017 is to be applied in addition to any other mandated labelling direct-marking requirements.The labelling and direct marking requirement of ISO 28219:2017 and other standards can be combined into one label or marking area or appear as separate labels or marking areas.ISO 28219:2017 uses the terms "part marking" and "item marking" interchangeably. Unless otherwise stated, ISO 28219:2017 will use the term "item marking" to describe both the labelling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch), as well as additive type processes (e.g. ink jet, vacuum deposition).The purpose of ISO 28219:2017 is to establish the machine-readable (linear, two-dimensional, and composite symbols) and human-readable content for direct marking and labelling of items, parts, and components.ISO 28219:2017 provides a means for items, parts and components to be marked, and read in either fixtured or hand-held scanning environments at any manufacturer's facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to, supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal.The figures are illustrative and not necessarily to scale or to the quality requirements specified in ISO 28219:2017.
标准预览图
