ISO 8178-6:2018 往复式内燃机 排气污染测量 第6部分：测量结果和试验的报告

标准编号：ISO 8178-6:2018

中文名称：往复式内燃机 排气污染测量 第6部分：测量结果和试验的报告

英文名称：Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test

发布日期：2018-07

标准范围

ISO 8178-6:2018规定了一种数据格式，用于报告移动、可运输和固定用途RIC发动机的废气排放测量结果，不包括主要用于道路用途的机动车发动机。它包括被测试发动机的基本信息。只要提供所需的发动机、测试单元和测试数据信息，就可以使用等效数据格式，包括电子生成的数据格式。ISO 8178-6:2018适用于实验室和现场（如适用）的测量。对于附加要求（如职业健康和安全法规、发电厂粉尘法规）涵盖的机械中使用的发动机，可采用附加试验条件和特殊评估方法。注:由于本文件中定义的报告格式适用于所有类型的内燃机，因此在某些情况下，某些项目对于特定的发动机和/或试验是不必要的，尤其是在现场测量时。另一方面，根据测试目的，可能需要一些额外的项目。删除和添加需要报告的项目是基于相关各方之间的协议。

ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required engine, test cell and test data information is made available.ISO 8178-6:2018 applies to measurement in the laboratory and, where applicable, at site.For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, dust regulations for powerplants), additional test conditions and special evaluation methods can apply.NOTE Since the report format defined in this document is intended to be applicable to all types of internal combustion engines, some items are, in certain cases, not necessary for specific engines and/or tests, especially when measuring on site. On the other hand, some additional items can be necessary according to test purposes. Deletion and addition of items to be reported are based on agreement between the parties involved.

标准预览图