ISO 2219:2010 建筑物用隔热制品 膨胀软木的预制品 规格
标准编号：ISO 2219:2010
中文名称：建筑物用隔热制品 膨胀软木的预制品 规格
英文名称：Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification
发布日期：2010-09
标准范围
ISO 2219:2010规定了膨胀软木工厂制造产品的要求，这些产品用于建筑物的隔热。该产品由粒状软木团聚而成，不含额外粘合剂，以无饰面的板材形式交付。ISO 2219:2010描述了产品特性，包括测试、合格评定、标记、标签和包装的程序。ISO 2219:2010涵盖的产品也用于预制隔热系统和复合板；不包括包含这些产品的系统的性能。ISO 2219:2010没有规定产品在特定应用中证明适用性所需的给定性能水平。给定应用所需的水平可在法规或非法规中找到相互冲突的标准。ISO 2219:2010不包括在10°C时声明的热阻低于0.25 m2 × K/W，或在10°C时声明的热导率大于0.060 W/（m × K）的产品。
ISO 2219:2010 specifies the requirements for factory-made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and are delivered as boards without facings.ISO 2219:2010 describes product characteristics and includes procedures for testing, evaluation of conformity, marking, labelling and packaging.Products covered in ISO 2219:2010 are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.ISO 2219:2010 does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,25 m2×K/W, at 10 °C, or a declared thermal conductivity greater than 0,060 W/(m×K), at 10 °C, are not covered in ISO 2219:2010.
标准预览图
