ISO 16431:2012 液压动力 组装系统的系统清洗规程和洁净度验证

标准编号：ISO 16431:2012

中文名称：液压动力 组装系统的系统清洗规程和洁净度验证

英文名称：Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems

发布日期：2012-01

标准范围

ISO16431:2012定义了方法为了测量组装的液压流体动力系统中的流体的清洁度，在系统从生产区放行时验证所需的系统清洁度，以及如果需要，将系统清洁到所需的清洁度水平。ISO16431:2012中规定的清理程序并非旨在取代适当的系统冲洗程序；系统冲洗程序参见ISO 23309。此类系统中使用的部件和零件应在组装前清洁；有关指导，请参见ISO 18413。

ISO16431:2012 defines methods

1. to measure the cleanliness of a fluid in an assembled hydraulic fluid power system,
2. to verify a required system cleanliness upon release of the system from the production area, and
3. if needed, to clean the system to the required cleanliness level.

The clean-up procedure specified in ISO16431:2012 is not intended to replace proper system flushing procedures; see ISO 23309 for a system flushing procedure. Components and parts used in such systems should be clean prior to assembly; see ISO 18413 for guidance.

标准预览图