ISO 813:2010 硫化橡胶或热塑性橡胶 与硬质板材粘合强度的测定 90°剥离法

标准编号：ISO 813:2010

中文名称：硫化橡胶或热塑性橡胶 与硬质板材粘合强度的测定 90°剥离法

英文名称：Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method

发布日期：2010-08

标准范围

ISO 813:2010规定了一种使用包含一条橡胶条的试样测定与刚性基材粘合的硫化橡胶或热塑性橡胶粘合强度的方法，该橡胶条与刚性材料的一块板粘合。试验在90°的剥离角下进行。该方法主要适用于实验室在标准条件下制备的试样，例如可用于为橡胶化合物或粘合剂系统的选择、此类材料的开发和制造过程的控制提供数据。该方法不适用于高硬度橡胶，通常高于85 IRHD。

ISO 813:2010 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes.This method is not suitable for high-hardness rubbers, typically above 85 IRHD.

标准预览图