ISO 10297:2006 气缸-可充填气瓶阀-技术规范和型号实验.

标准编号：ISO 10297:2006

中文名称：气缸-可充填气瓶阀-技术规范和型号实验.

英文名称：Transportable gas cylinders — Cylinder valves — Specification and type testing

发布日期：2006-01

标准范围

ISO 10297:2006规定了拟安装在输送压缩、液化或溶解气体的气瓶上的阀门的设计、生产和标记要求以及型式试验方法。ISO 10297:2006不适用于低温设备、灭火器或液化石油气（LPG）的阀门。ISO 10297:2006未涵盖安装减压装置（见ISO 22435和EN 738-3）、余压保持装置和止回装置（见ISO 15996）以及爆破片和泄压装置（见ISO 4126和prEN 14513）的阀门的其他具体要求。注:ISO 14245和EN 13152以及ISO 15995和EN 13153中规定了液化石油气（LPG）阀门的要求。ISO 21011规定了低温容器阀门的要求。EN 144-1、EN 144-2和EN 144-3中规定了呼吸装置阀门的进一步具体要求。

ISO 10297:2006 specifies valve design, production and marking requirements, and type test methods for valves intended to be fitted to gas cylinders which convey compressed, liquefied or dissolved gases.ISO 10297:2006 does not apply to valves for cryogenic equipment, for fire extinguishers or for liquefied petroleum gas (LPG).Additional specific requirements for valves fitted with pressure-reducing devices (see ISO 22435 and EN 738-3), residual pressure-retaining devices and non-return devices (see ISO 15996), and bursting discs and pressure-relief devices (see ISO 4126 and prEN 14513) are not covered by ISO 10297:2006.NOTE Requirements for valves for liquefied petroleum gas (LPG) are specified in ISO 14245 and EN 13152, and in ISO 15995 and EN 13153. Requirements for valves for cryogenic vessels are specified in ISO 21011. Further specific requirements for valves for breathing apparatus are specified in EN 144-1, EN 144-2 and EN 144-3.

标准预览图