ISO 28278-2:2010 建筑玻璃 玻璃装配结构密封用玻璃产品 第2部分：装配规则

标准编号：ISO 28278-2:2010

中文名称：建筑玻璃 玻璃装配结构密封用玻璃产品 第2部分：装配规则

英文名称：Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules

发布日期：2010-12

标准范围

ISO 28278-2:2010给出了框架、窗户、门或幕墙结构中玻璃元件的组装和粘合指南，或通过将玻璃元件结构粘合到框架或框架上或直接粘合到建筑中的方式，将玻璃元件组装和粘合到建筑中。它向装配工提供信息，使其能够组织工作并遵守有关质量控制的要求。装配过程的质量控制至关重要。ISO 28278-2:2010规定了单个项目结构密封胶玻璃（SSG）工艺可接受质量控制的最低要求。ISO 28278-2:2010末尾包含的附件提供了确保安全和防风雨玻璃装配产品正确应用和记录的方法。该流程旨在适用于大多数SSG项目。对金属基材和玻璃制品进行的项目测试将确定适当的表面处理和安装说明。这些规则不适用于油漆饰面或玻璃制品的附着力或耐久性。这不是SSG工艺中常用的油漆和玻璃产品的耐久性测试要求。结构玻璃应用中常用的结构、防风雨和密封剂产品是基于有机硅、“硅”聚合物的产品。ISO 28278-2:2010不排除使用其他类型的密封剂，根据ISO 28278-2:2010，这些密封剂可以证明其适用于服务，并且按照密封剂制造商的建议使用。

ISO 28278-2:2010 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building.It gives the assembler information that enables him to organize his work and comply with requirements regarding quality control.Quality control of the assembly process is of the highest importance. ISO 28278-2:2010 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of ISO 28278-2:2010 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product.This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions.These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process.The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, "silicone" polymers.ISO 28278-2:2010 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to ISO 28278-2:2010 and when they are used following the recommendations of the sealant manufacturer.

标准预览图