ISO 22915-10:2008 工业车辆 稳定性的验证 第10部分：有动力装置侧移载荷堆垛的特殊条件下车辆驾驶的附加稳定性试验
标准编号：ISO 22915-10:2008
中文名称：工业车辆 稳定性的验证 第10部分：有动力装置侧移载荷堆垛的特殊条件下车辆驾驶的附加稳定性试验
英文名称：Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
发布日期：2008-06
标准范围
ISO 22915涉及ISO 5053中定义的工业卡车相对于其稳定性和稳定性验证的安全性。就ISO 22915而言，工业卡车是轮式、自行式或步行式车辆，但在轨道上行驶的除外。它们要么由操作员控制，要么无人驾驶，设计用于在货架上搬运、拖曳、推动、提升、堆叠或分层。ISO 22915-10:2008规定了一项附加试验，用于验证装有动力负载处理装置（如侧移）的满载卡车的稳定性，该装置可将重心从卡车的纵向中心平面移动到一个实质性的预定范围。在这种模式下，此类装置用于在桅杆垂直或提升至最大起重臂角度和伸展度的情况下沉积和回收负载。对于额定容量小于5000 kg、150 mm的载重汽车，对于额定容量大于或等于5000 kg、小于或等于10000 kg、250 mm的载重汽车，对于额定容量大于10000 kg、小于20 000 kg、350 mm的载重汽车，如果位移大于100 mm，则认为位移为实质性位移，对于额定容量大于或等于20000 kg的卡车。
ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self？propelled or pedestrian？propelled vehicles, excepting those running on rails. They are either operator？controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks.ISO 22915-10:2008 specifies an additional test for verifying the stability of a laden truck fitted with a powered load-handling device, such as a sideshift, which can displace the centre of gravity to a substantial, predetermined extent from the longitudinal centre plane of the truck. Such devices are used in that mode for depositing and retrieving a load with the mast vertical or raised to maximum boom angle and extension.A displacement is considered to be a substantial displacement if it is more than 100 mm, for a truck with a rated capacity less than 5 000 kg, 150 mm, for a truck with a rated capacity greater than or equal to 5 000 kg and less than or equal to 10 000 kg, 250 mm, for a truck with a rated capacity greater than 10 000 kg and less than 20 000 kg, 350 mm, for a truck with a rated capacity greater than or equal to 20 000 kg.
标准预览图
