ISO 6806:2017 用于油燃烧器的软管和软管组件 规范

标准编号：ISO 6806:2017

中文名称：用于油燃烧器的软管和软管组件 规范

英文名称：Rubber hoses and hose assemblies for use in oil burners — Specification

发布日期：2017-06

标准范围

ISO 6806:2017规定了燃油器用橡胶软管和软管组件的最低要求。规定了以下两种类型的软管总成。-类型1:用于流量和回流的软管组件，但不用于插入燃油燃烧器泵和雾化接头之间；最大工作压力1.0兆帕（10巴）；最高油温100℃。-类型2:用于插入燃油燃烧器泵和雾化接头之间的软管组件；最大工作压力4.0 MPa（40巴）；最高油温100℃。未经特殊评估，本文件中规定的软管组件不得用于燃油燃烧器安装以外的用途。

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.The following two types of hose assembly are specified.- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

标准预览图