ISO 13000-1:2005 塑料 聚四氟乙烯（PTFE）半精加工产品 第1部分：要求和牌号

标准编号：ISO 13000-1:2005

中文名称：塑料 聚四氟乙烯（PTFE）半精加工产品 第1部分：要求和牌号

英文名称：Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation

发布日期：2005-11

标准范围

ISO 13000-1:2005规定了可能以多种形式出现的加工未填充聚四氟乙烯（PTFE）产品的要求。ISO 12086-1中描述了用于制造半成品的PTFE，如ISO 12086-1中所述，PTFE最多可含有1%的共聚单体。用于制造半成品的PTFE可以是未经加工、再加工或回收的树脂。允许添加高达1.5%（按质量计）的颜料或着色剂。ISO 13000的本部分根据抗拉强度和断裂伸长率分为四个等级。半成品可以是加工的（P型）或尺寸稳定的（S型），也可以具有特定的电气性能或应用所需的其他性能。

ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

标准预览图