ISO/IEC TR 18047-6:2008 信息技术 射频识别设备合规性试验方法 第6部分：860~960赫兹空中接口通信试验方法
标准编号：ISO/IEC TR 18047-6:2008
中文名称：信息技术 射频识别设备合规性试验方法 第6部分：860~960赫兹空中接口通信试验方法
英文名称：Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
发布日期：2008-12
标准范围
ISO/IEC 18000定义了物品管理应用中使用的射频识别（RFID）设备的空中接口。ISO/IEC 18000-6定义了这些在860 MHz至960 MHz频率下工作的设备的空中接口。ISO/IEC TR 18047提供了符合ISO/IEC 18000各个部分的测试方法。ISO/IEC TR 18047的每个部分都包含了为确定产品是否符合ISO/IEC 18000的相应部分而需要对产品进行的所有测量。对于ISO/IEC TR 18047-6:20 08，需要对每个询问器进行A型和B型操作评估，而每个标签仅需要支持A型或B型或C型中的至少一种。ISO/IEC 18046涵盖了标签和询问器性能的测量。ISO/IEC TR 18047-6:20 08定义了用于确定物品管理的射频识别设备（标签和询问器）是否符合ISO/IEC 18000-6，但不适用于符合法规或类似要求的测试。测试方法仅要求验证强制功能和实现的任何可选功能。在适当的情况下，这可以由在一般情况下不可用的另外的特定于应用的功能性标准来补充。ISO/IEC TR 18047-6:20 08中的询问器和标签符合性参数如下:特定类型的一致性参数，包括标称值和公差；直接影响系统功能和互操作性的参数。ISO/IEC TR 18047-6:20 08中未包括以下内容:已包含在法规测试要求中的参数；高级数据编码一致性测试参数（ISO/IEC 15962中规定）。除非另有规定，否则ISO/IEC TR 18047-6:20 08中的测试仅适用于ISO/IEC 18000-6中定义的RFID标签和询问器。ISO/IEC TR 18047-6:20 08还描述了所有必要的一致性测试。
ISO/IEC 18000 defines the air interfaces for radio frequency identification (RFID) devices used in item management applications. ISO/IEC 18000-6 defines the air interface for these devices operating at frequencies from 860 MHz to 960 MHz.ISO/IEC TR 18047 provides test methods for conformance with the various parts of ISO/IEC 18000.Each part of ISO/IEC TR 18047 contains all measurements required to be made on a product in order to establish whether it conforms to the corresponding part of ISO/IEC 18000. For ISO/IEC TR 18047-6:2008, each interrogator needs to be assessed for operation with both types A and B, while each tag is only required to support at least one of the types A or B or C.Measurement of tag and interrogator performance is covered by ISO/IEC 18046.ISO/IEC TR 18047-6:2008 defines test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in ISO/IEC 18000-6, but does not apply to the testing of conformity with regulatory or similar requirements.The test methods require only that the mandatory functions, and any optional functions which are implemented, be verified. This may, in appropriate circumstances, be supplemented by further application-specific functionality criteria that are not available in the general case.The interrogator and tag conformance parameters in ISO/IEC TR 18047-6:2008 are the following:
- type-specific conformance parameters including nominal values and tolerances;
- parameters that apply directly affecting system functionality and inter-operability.
- parameters that are already included in regulatory test requirements;
- high-level data encoding conformance test parameters (these are specified in ISO/IEC 15962).
标准预览图
