ISO 9183-1:2008 压制工具 压模用磨耗板 第1部分：A型

标准编号：ISO 9183-1:2008

中文名称：压制工具 压模用磨耗板 第1部分：A型

英文名称：Tools for pressing — Wear plates for press dies — Part 1: Type A

发布日期：2008-03

标准范围

ISO 9183-1:2007规定了主要用于大型冲模的A型冲模的基本尺寸和磨损公差，单位为毫米。它还指定了用于连接的间隙孔的尺寸和位置。ISO 9183-1:2007给出了材料指示，并规定了符合ISO 9183本部分要求的A型冲模耐磨板的名称。规定了这种类型耐磨板的两种厚度:厚度为20 mm的A1型耐磨板和厚度为12 mm的A2型耐磨板。

ISO 9183-1:2007 specifies the basic dimensions and tolerances in millimetres of wear for press dies, type A, intended for use mainly in large press dies. It also specifies the size and positions of the clearance holes for attachment.ISO 9183-1:2007 gives material indications, and specifies the designation of wear plates for press dies, type A, which meet the requirements of this part of ISO 9183.Two thicknesses of this type of wear plate are specified: type A1, with a thickness, t, of 20 mm, and type A2, with a thickness, t, of 12 mm.

标准预览图