ISO 6164:2018 液压动力 用于压力为42 MPa、DN 25至80场合的四螺杆、一件式方形法兰接头
标准编号：ISO 6164:2018
中文名称：液压动力 用于压力为42 MPa、DN 25至80场合的四螺杆、一件式方形法兰接头
英文名称：Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
发布日期：2018-06
标准范围
本文件给出了适用于在42 MPa【420 bar【1】】压力下使用的四螺钉一体式方形法兰夹式管接头和软管接头的法兰头、法兰夹、端口和安装表面的一般和尺寸规范。它还规定了要使用的密封件的尺寸，以及容纳密封件的凹槽。这些连接旨在应用于工业和商业产品上的液压系统中，其中期望避免使用螺纹连接器。[1]1巴=0.1 MPa=105巴；1Pa=1N/m2。
This document gives general and dimensional specifications for flanged heads, flange clamps, ports and mounting surfaces applicable to four-screw, one-piece square flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa [420 bar[1]]. It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.[1] 1 bar = 0,1 MPa = 105 Pa; 1 Pa = 1 N/m2.
标准预览图
