ISO 13703-3:2023 包括低碳能源在内的石油和天然气工业 海上生产平台和陆上工厂上的管道系统 第3部分：制造

标准编号：ISO 13703-3:2023

中文名称：包括低碳能源在内的石油和天然气工业 海上生产平台和陆上工厂上的管道系统 第3部分：制造

英文名称：Oil and gas industries including lower carbon energy — Piping systems on offshore production platforms and onshore plants — Part 3: Fabrication

发布日期：2023-09

标准范围

本文件规定了固定式和浮动式海上生产设施以及陆上生产、加工和天然气液化厂在满足ASME B31.3要求的材料的温度范围限制内的新型金属管道系统的制造、安装、焊接、检查、检验和试验的要求。对于压力等级2500以上的管道系统，第？除本标准规定的要求外，还应符合ASME B31.3的IX。本文件适用于所有保压部件和任何非保压部件，如直接焊接到保压部件上的管道支架的构件。本文件不适用于以下情况:—？与海洋相关的管道系统，例如。g.压载管道系统，船级社涵盖的系统；—？用于海底脐带系统的金属管；注1？这些部件的焊接和检查可参考ISO 13628-5或API Spec 17E。—？具有耐腐蚀包层（整体包层或机械内衬）或堆焊层的管道系统，包括涂油和相关的异种焊缝；注2？这些系统的焊接和检验可参考DNV-RP-B204。—？耐火合金【CP钛1级（UNS R50250）或2级（UNS R50400）除外】；—？非金属管道组件；—？根据公认的管道设计规范设计的运输管道系统，包括流线。

This document specifies requirements for the fabrication, installation, welding, inspection, examination and testing of new, metallic piping systems, within temperature range limits for the materials meeting the requirements of ASME B31.3, on fixed and floating offshore production facilities and onshore production, processing and gas liquefaction plants. For piping systems above pressure class 2500, the requirements of chapter IX of ASME B31.3 shall be complied with, in addition to the requirements stated in this standard.

This document is applicable to all pressure retaining components and any non-pressure retaining component, such as a member of a pipe support, welded directly to a pressure retaining component.

This document is not applicable to the following:

—    marine-related piping systems, e.g. ballasting piping systems, systems covered by classification societies;

—    metallic tubing used for subsea umbilical systems;

NOTE 1    Reference can be made to ISO 13628-5 or API Spec 17E for welding and examination of these components.

—    piping systems with corrosion resistant cladding (either integrally clad or mechanically lined) or weld overlay, including buttering and associated dissimilar welds;

NOTE 2    Reference can be made to DNV-RP-B204 for welding and examination of these systems.

—    refractory alloys [with exception of CP titanium Grade 1 (UNS R50250) or Grade 2 (UNS R50400)];

—    non-metallic piping assemblies;

—    transportation pipeline systems, including flow-lines, designed in accordance with a recognized pipeline design code.

标准预览图