ISO 11515:2022 气瓶 水容积在450升和3000升之间可重复充装的复合增强管 设计、制造和测试
标准编号：ISO 11515:2022
中文名称：气瓶 水容积在450升和3000升之间可重复充装的复合增强管 设计、制造和测试
英文名称：Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 l and 3000 l — Design, construction and testing
发布日期：2022-08
标准范围
本文件规定了材料、设计、施工和性能测试的最低要求—？类型？2个环包复合管，—？类型3全包裹复合管，以及—？4型全包复合管水容量在450之间？l和3？000？l用于储存和运输试验压力不超过1？600？条[1]，设计寿命至少为15？年。本文件适用于预期的工作温度？40？°C和+65？°C。笔记？类型？4按照本文件制造和测试的管子不得含有毒性、氧化性或腐蚀性气体。本文件适用于基体中具有碳纤维或芳族聚酰胺纤维或玻璃纤维（或其混合物）复合增强的管。？[1]1巴=0.1 MPa=105巴；1MPa=1N/mm2。
This document specifies the minimum requirements for the materials, design, construction and performance testing of— Type 2 hoop-wrapped composite tubes,— Type 3 fully-wrapped composite tubes, and— Type 4 fully-wrapped composite tubeswith water capacities between 450 l and 3 000 l for storage and conveyance of compressed or liquefied gases with test pressures up to and including 1 600 bar[1] and a design life of at least 15 years.This document is applicable to expected service temperatures between？40 °C and +65 °C.NOTE Type 4 tubes manufactured and tested to this document are not intended to contain toxic, oxidizing or corrosive gases.This document is applicable to tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.
标准预览图
