ISO 5211:2023 工业阀门 部分回转驱动装置的连接

标准编号：ISO 5211:2023

中文名称：工业阀门 部分回转驱动装置的连接

英文名称：Industrial valves — Part-turn actuator attachments

发布日期：2023-09

标准范围

本文件规定了将带或不带齿轮箱的部分回转执行器连接到工业阀门的要求。根据本文件的要求将部分回转执行器连接到控制阀上，由供应商和买方达成协议。本文件规定:—？将部分回转执行器连接到工业阀门所需的法兰尺寸【见图？1？a）和1？c）】或中间支架【见图？1？b）和1？d）】；—？将部分回转致动器附接到从动部件所必需的驱动部件尺寸；—？具有本文件规定尺寸的接口和联轴器的扭矩参考值。将中间支架连接到瓣膜超出了本文档的范围。

This document specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.

The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser.

This document specifies:

—     flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)];

—     driving component dimensions of part-turn actuators necessary to attach them to the driven components;

—     reference values for torques for interfaces and for couplings having the dimensions specified in this document.

The attachment of the intermediate support to the valve is out of the scope of this document.

标准预览图