ISO 6195:2002 液压系统和组件.液压缸.往复作用的刮垢环罩.尺寸和公差

标准编号：ISO 6195:2002

中文名称：液压系统和组件.液压缸.往复作用的刮垢环罩.尺寸和公差

英文名称：Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances

发布日期：2002-12

标准范围

ISO 6195:2002规定了流体动力缸往复杆应用中使用的刮水器环外壳的尺寸和公差。杆直径范围为4mm至360mm。ISO 6195:2002适用于以下四种外壳设计。A型:带有底切或单独盖的凹进式外壳以保持弹性刮水器（这些是没有整体刚性加强的单唇刮水器的首选外壳）。B型:用于带有整体刚性加强件的雨刷的开放式凹槽外壳，压配合在外壳中。C型:带有底切以保持弹性刮水器的凹进式外壳（这些是没有整体刚性加强的双唇刮水器的优选外壳）。D型:带有底切的凹进式外壳，以保持弹性体激励的塑料面雨刷。ISO 6195:2002没有规定刮水器环的样式、配置、材料或性能等级。

ISO 6195:2002 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.ISO 6195:2002 is applicable to the following four housing designs.

• Type A: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).
• Type B: open recessed housings for wipers with integral rigid enforcement, that are a press-fit in the housing.
• Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).
• Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.

ISO 6195:2002 does not otherwise specify the style, configurations, materials, or performance ratings for the wiper ring.

标准预览图